DSC series dust collector manufacturers tell you that according to the principle of action, dust collectors can be divided into the following types: 1. Dry mechanical dust collectors. The manufacturer of the DSC series dust collector tells you that it mainly refers to the dust removal equipment designed by the application of dust inertia and gravity, such as sedimentation chamber, inert dust collector, cyclone dust collector, and other high concentration dust collectors, etc., mainly for high concentration coarse particle diameter It is used for separation or concentration of dust.

2. Wet dust collector. The DSC series dust collector manufacturer tells you that it relies on hydrophilicity to separate and capture dust particles, such as spray towers, scrubbers, impact dust collectors, venturis, etc. It is often used in the case of dealing with dusty gas with high concentration and large air volume in the production process. For coarser, hydrophilic dust, the separation efficiency is higher than that of dry mechanical dust collectors.
3. Particle layer dust collector. The DSC series dust collector manufacturer tells you that it is a device that uses the accumulation layer of granular materials of different particle sizes as the filter material to block and filter the dust contained in the aerosol. It is mainly used in the dust discharge point in the production process of building materials and metallurgy and is often used to filter dusty flue gas with high concentration, coarse particles, and high temperature.
The above information is the DSC series dust collector manufacturer's introduction and analysis of the classification of dust collectors, hope it helps you.